PodLink Platform: Octal High-Speed Passive SensorPod

newsletter \| contact us \|login

You are at > >

Octal High-Speed Passive SensorPod

PodLink: For PHM, CBM, Snap-in/Snap-out, and In-Flight Data Acquisition

DSPCon's PodLink Platform
Rugged. Flexible. Distributed.
Lowering Costs. Decreasing Risk.

SensorPod: Octal High-Speed Passive SensorPod

Octal High-Speed Passive SensorPod

The intial member of DSPCon's SensorPod family is the Octal High-Speed Passive SensorPod.

Use this Sensor pod with:

tachometers
conditioned sensors
passive dynamic accelerometers

Specifications:

Dimensions: 3.625" x 3" x .85"
Operating range: up to 105 C
Sensor Interfaces: IEPE compatible direct voltage (unbalanced/differential: switchable) and charge-coupled
Analog input
- 8 simultaneously sampled channels
- 16-bit resoution
- Controllable sample rate up to 200kS/sec
- 10 V Max voltage
- Voltage range: -10V to 10V
- Max voltage range accuracy: 0.003 V
- Impedance: 1 mega-ohm
- Input connector 50-ohm SMC
- Input range: ±0.01 to ±10 volts in 1/2/5 steps
- Dynamic Range > 88dB (measured at input >± 1 Volt)
16-bit SAR ADCs
NIST-traceable calibration
High common-mode voltage range
ROHS Compliance
Measurement type: Voltage
Channel-to-earth ground double isolation barrier

PodLink Applications

Use PodLink platform for applications where scalability, flexibility, rugged performance, and quick set-up are key to lowering costs and mitigating risk:

PHM: Prognositc Health Management
CBM: Condition Based Maintenance
Snap-in/Snap-out solutions
In-flight Data Acquisition
On-board validation

PodLink SensorPods

To create a complete system, DSPCon designed a family of ruggedized SensorPod units that connect to a PodLink Control/Processor Pod.

SensorPods offer interfaces to a broad set of passive and active sensors, covering multiple testing needs.

All SensorPods share the following set of high-level specifications:

Dimensions: 3.635" x 3" x .85"
Operating range: up to 105 C
NIST-traceable calibration
ROHS compliant
Channel-to-earth ground double isolation barrier

Follow the links below for details on each PodLink SensorPod:

Octal High-speed Passive SensorPod

More SensorPods available soon:

Octal High-speed Excited SensorPod
32/64 Channel Low-speed SensorPod
16/32 Channel Low-speed Excited SensorPod
SerialLink SensorPod
Thermocouple SensorPod

Privacy Statement | Terms Of Use

DSPCon is a division of CDI-Aerospace, LLC